三种增材制造工艺下金属构件性能试验分析Performance Test and Analysis of Metal Components Fabricated by Three Additive Manufacturing Processes
孙迪,张君,王敏强,郭居魁,周斌
摘要(Abstract):
针对激光选区熔化增材制造技术(SLM)、电弧熔丝增材制造技术(WAAM)、电子束熔丝增材制造技术(EBF~3)三种金属增材制造工艺的适配性差异,选取三种不同材料、不同结构的复杂典型金属构件为研究对象,通过化学成分稳定性分析、力学性能拉伸试验,对比铸造、锻造与增材制造性能差异,对三种增材制造工艺的适用材料范围提供参考。该研究可为有色金属、航空航天复杂构件的增材制造工艺选型、参数优化及性能调控提供理论依据与工程参考,推动增材制造技术在高端装备制造领域的规范化应用。
关键词(KeyWords): 增材制造;性能分析;差异性
基金项目(Foundation): 国家“万人计划”科技创新领军人才特殊支持项目(W02020307);; 中国机械工业集团有限公司重大科技专项(ZDZX2022-3)
作者(Author): 孙迪,张君,王敏强,郭居魁,周斌
DOI: 10.14147/j.cnki.51-1396/tg.2026.05.007
参考文献(References):
- [1]关桥.焊接/连接与增材制造(3D打印)[J].焊接,2014(5):1-8.
- [2]Laureijsr E,Roca J B,Narra S P,et al. Metal additive manufacturing:Cost competitive beyond low volumes[J]. Journal of Manufacturing Science and Engineering,2017,139(8):081010.
- [3]Nie Z G,Jung S,Kara L B,et al. Optimization of part consolidation for minimum production costs and time using additive manufacturing[J]. Journal of Mechanical Design,2020,142(7):072001.
- [4]李坤,马锐津,戴启雷,等.高性能镁合金激光制造技术研究现状及展望[J].航空制造技术,2022,65(23/24):30-47.
- [5]Paolini A, Kollmannsberger S, RANKE. Additive manufacturing in construction:Areview on processes,applications,and digital planning methods[J]. Additive Manufacturing,2019,30:100894.
- [6]Salmi M. Additive manufacturing processes in medical applications[J]. Materials,2021,14(1):191.
- [7]Blakey-Milner B,Gradl P,Snedden G,et al. Metal additive manufacturing in aerospace:A review[J].Materials&Design,2021,209:110008.
- [8]顾冬冬,张红梅,陈洪宇,等.航空航天高性能金属材料构件激光增材制造[J].中国激光,2020,47(5):050002.
- [9]赵锦龙,王鹏程,刘海亮.应用激光选区烧结技术制作人体膝关节模型[J].现代制造工程,2016(9):30-32.
- [10]吴超群,增材制造技术[M].北京:机械工业出版社,2020.
- [11]韩智,陈瑞,王宇,等.电弧熔丝增材制造技术研究进展[J].特种铸造及有色合金,2021,41(11):1381-1386.
- [12]Taminger K M,Hafley R A,Domack M S. Evolution and Control of 2219 Aluminium Microstructural Features through Electron Beam Freeform Fabrication[J].Materials Science Forum. 2006, 519-521:1297-1302.
- [13]Xu Junqiang,Zhu Jun,Fan Jikang,et al. Microstructure and mechanic-al properties of Ti-6Al-4V alloy fabricated using electron beam freeform fabrication[J]. Volume 167,September 2019.
- [14]Han W,Fang F Z. Investigation of electrochemical properties of electropolishing Co-Cr dental alloy[J].Journal of Applied Electrochemistry,2020,50(3):367-381.
- [15]易海佳.增材制造316L不锈钢成型工艺及性能研究[D].北京:北方工业大学,2020.
- [16]唐伟,韩恩厚,徐永波,等.热处理对AZ80镁合金结构及性能的影响[J].金属学报,2005,41(11):1199-1206.
- [17]Lu Chengling,Liu Tianmo,Liu Dejun,et al. Effect of heat treatment on tension-compression yield asymmetry of AZ80 magnesium alloy[J]. Materials and Design,2011,33:529-533.
- [18]范芳,张竹林,王从明,等.基于流变行为和加热工图的2014铝合金轮毂成型工艺[J].塑性工程学报,2022,29(10):143-152.